 |
| Quantity: | |
|---|---|
Our products are to comply with environmental requirements in accordance
with SONY code no. SS-00259 with restrictions of 10 harmful materials.
Features
High power up to 4W
Lowest TCR from ±50ppm/℃
Compatible with both wave soldering and reflow soldering
Size | （L） | （W） | （T） | （E） |
0805 | 2.00±0.20 | 1.25±0.20 | 0.35±0.20 | 0.5±0.20 |
1206 | 3.20 ±0.20 | 1.60 ±0.20 | 0.60 ±0.20 | 0.50 ±0.20 |
2512 | 6.40 ±0.20 | 3.20 ±0.20 | 0.70 ±0.20 | 0.90 ±0.20 |
D: 2.40 ±0.20 |
Type | Rated power | Resistance Range |
TCR (ppm/℃) | Insulation Resistance | |
D(±0.5%) | F(±1%) G(±2%) J(±5%) | ||||
MFR05 | 1W | 5mΩ ≤R≤ 10mΩ | ±50 |
>100MΩ | |
MFR06 | 1W | 0Ω : R ≤ 0.8mΩ ; 1mΩ ≤R≤ 100m | 0Ω& 1mΩ ≤R≤ 4mΩ: ±350 | ||
1/2W | 101mΩ ≤R≤ 200mΩ | 5mΩ ≤R≤ 500mΩ: ±50 | |||
MFR25 | 1W 2W 3W 4W |
/ |
0Ω: R<0.45mΩ; 0.5mΩ ≤R≤ 500mΩ | 0.5mΩ ≤R≤ 4mΩ 大电极: ±50 | |
0Ω& 1mΩ ≤R≤ 2mΩ: ±350 | |||||
3mΩ ≤R≤ 500mΩ: ±50 | |||||
Test Item | Test ethods | Test conditions | specification |
Temperature coefficient |
IEC601 15-14.8 | TCR= (R-R0) / (t-to) Ro × 106 (ppm) Ro ：(resistance at room temperature) R： (resistance at ＋125℃ or +155℃) to ： (room temperature) T ：( test temperature +125℃ or +155℃ ) |
please refer to the spec. |
High Temperature Exposure |
MIL-STD-202 Method 108 | 1000 hrs. @T= 125 ℃. Measure the variation of resistance at 24±4 hours after test conclusion. |
△< ±1% |
Low Temperature operation |
IEC601 15-14.23.4 | 45 min. @T=-55 ℃ . Measure the variation of resistance after test conclusion. |
△< ±1% |
Temperature cycling |
JESD22 Method JA - 104 | 1000cycles (-55℃ to ＋125℃) Measurement at 24±4 hours after test conclusion. Measure the variation of resistance at 24±4 hours after test conclusion. |
△< ±1% |
short-time overload |
IEC601 15-14.13 | Applied 5 . 0 times ofrated power for 5 second Measure the variation ofresistance. |
△< ±1% |
Why choose us?
1.Fast delivery time
With adequate monthly capacity of SMD resistors 15 Billion PCS and through hole resistors 20 Million PCS, we can secure fast delivery time to all the customers.
2. High quality
With more than 39 years in the industry, we well know the relevant standards and manufacture products based on requirements, also we have perfect quality system and tools to monitor the product from raw materials to finished products to secure quality .
3. Professional and reliable team
With a professional and experienced team, we understand every requirement of our customers and always try out best to satisfy them.
4. Quick Response
If you have any enquires or problem, please feel free to contact with us, we will try to answer you within 24 hours.
F.A.Q
Question 1
Question: Does the sample fee can be returned?
Answer: We can provide free samples.
Question 2
Question: How long will it take to receive my order?
Answer: The lead-time depends on your order quantity and destination.
Welcome to contact us freely for more details about our products!
Our products are to comply with environmental requirements in accordance
with SONY code no. SS-00259 with restrictions of 10 harmful materials.
Features
High power up to 4W
Lowest TCR from ±50ppm/℃
Compatible with both wave soldering and reflow soldering
Size | （L） | （W） | （T） | （E） |
0805 | 2.00±0.20 | 1.25±0.20 | 0.35±0.20 | 0.5±0.20 |
1206 | 3.20 ±0.20 | 1.60 ±0.20 | 0.60 ±0.20 | 0.50 ±0.20 |
2512 | 6.40 ±0.20 | 3.20 ±0.20 | 0.70 ±0.20 | 0.90 ±0.20 |
D: 2.40 ±0.20 |
Type | Rated power | Resistance Range |
TCR (ppm/℃) | Insulation Resistance | |
D(±0.5%) | F(±1%) G(±2%) J(±5%) | ||||
MFR05 | 1W | 5mΩ ≤R≤ 10mΩ | ±50 |
>100MΩ | |
MFR06 | 1W | 0Ω : R ≤ 0.8mΩ ; 1mΩ ≤R≤ 100m | 0Ω& 1mΩ ≤R≤ 4mΩ: ±350 | ||
1/2W | 101mΩ ≤R≤ 200mΩ | 5mΩ ≤R≤ 500mΩ: ±50 | |||
MFR25 | 1W 2W 3W 4W |
/ |
0Ω: R<0.45mΩ; 0.5mΩ ≤R≤ 500mΩ | 0.5mΩ ≤R≤ 4mΩ 大电极: ±50 | |
0Ω& 1mΩ ≤R≤ 2mΩ: ±350 | |||||
3mΩ ≤R≤ 500mΩ: ±50 | |||||
Test Item | Test ethods | Test conditions | specification |
Temperature coefficient |
IEC601 15-14.8 | TCR= (R-R0) / (t-to) Ro × 106 (ppm) Ro ：(resistance at room temperature) R： (resistance at ＋125℃ or +155℃) to ： (room temperature) T ：( test temperature +125℃ or +155℃ ) |
please refer to the spec. |
High Temperature Exposure |
MIL-STD-202 Method 108 | 1000 hrs. @T= 125 ℃. Measure the variation of resistance at 24±4 hours after test conclusion. |
△< ±1% |
Low Temperature operation |
IEC601 15-14.23.4 | 45 min. @T=-55 ℃ . Measure the variation of resistance after test conclusion. |
△< ±1% |
Temperature cycling |
JESD22 Method JA - 104 | 1000cycles (-55℃ to ＋125℃) Measurement at 24±4 hours after test conclusion. Measure the variation of resistance at 24±4 hours after test conclusion. |
△< ±1% |
short-time overload |
IEC601 15-14.13 | Applied 5 . 0 times ofrated power for 5 second Measure the variation ofresistance. |
△< ±1% |
Why choose us?
1.Fast delivery time
With adequate monthly capacity of SMD resistors 15 Billion PCS and through hole resistors 20 Million PCS, we can secure fast delivery time to all the customers.
2. High quality
With more than 39 years in the industry, we well know the relevant standards and manufacture products based on requirements, also we have perfect quality system and tools to monitor the product from raw materials to finished products to secure quality .
3. Professional and reliable team
With a professional and experienced team, we understand every requirement of our customers and always try out best to satisfy them.
4. Quick Response
If you have any enquires or problem, please feel free to contact with us, we will try to answer you within 24 hours.
F.A.Q
Question 1
Question: Does the sample fee can be returned?
Answer: We can provide free samples.
Question 2
Question: How long will it take to receive my order?
Answer: The lead-time depends on your order quantity and destination.
Welcome to contact us freely for more details about our products!
