 |
| Quantity: | |
|---|---|
MF-100SS
HKR
High Precision Metal Film Fixed Resistor SPECIFICATIONS:
| DESCRIPTION | MF-100SS |
| TANDARD RESISTANCE VALUE RANGE | 0.1~1MΩ |
| POWER RATING AT 70℃ | 1W |
| MAX WORKING VOLTAGE | 250V |
| MAX OVERLOAD VOLTAGE | 500V |
| OPERATING TEMPERATURE RANGE | -55℃~+155℃ |
| TEMPERATURE COEFFICIENT | ±100PPM |
| TEMPERATURE CYCLING | ±( 0.5%R+0.05Ω) |
| INSULATION RESISTANCE | MIN.1,000 MΩ |
| HUMIDITY | ±( 1.5%R+0.05Ω) |
| SHORT-TIME OVERLOAD | ±( 0.5%R+0.05Ω) |
| SOLDERABILITY | MIN. 95% COVERED |
| VIBRATION | ±( 0.5%R+0.05Ω) |
| LOAD LIFE | ±( 2%R+0.05Ω) |
High Precision Metal Film Fixed Resistor CHARACTERISTICS:
| DC RESISTANCE VALUE | TEST METHOD MIL-STD-202 ITEM 303 | VOLTAGE AS TABLE -4. TEMPERATURE 25 ±2℃. AQL 0.25%. |
| VOLTAGE WITHSTAND | TEST METHOD MIL-STD-202 ITEM 301 | V-BLOCK METHOD. VOLTAGE AS TABLE -3 ×1.42 , 1 MIN. AQL 1%. |
| SHORT TIME OVERLOAD | TEST METHOD JIS C 5202 ITEM 5.5 | RATED VOLTAGE × 2.5 TIMES OR MAX.WORKINGVOLTAGE × 2 TIMES. ABOVE TEST 5 SEC. THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(0.5%R+0.05 Ω). |
| TERMINAL STRENGTH | TEST METHOD MIL-STD-202 ITEM 211 | TENSILE STRENGTH : 1K TENSIONAL STRENGTH : 180°, 2 CYCLES. BENDING STRENGTH : 0.5KG, 2 TIMES. THE RESISTANCE VALUE CHANGE RATE SHALL BEWITHIN ±(0.5%R+0.05 Ω). |
| SOLDERABILITY OF TERMINAL | TEST METHOD MIL-STD-202 ITEM 210 | 260±5℃ 10±1SEC. AFTER TESTING, LEAVE FOR 3 HOURS. THE RESISTANCE VALUE CHANGE RATE SHALL BEWITHIN ±(0.5%R+0.05 Ω). |
| TEMPERATURE CYCLE | TEST METHOD MIL-STD-202 ITEM 107 | LOW SIDE TEMPERATURE : -55℃±3℃ 30MIN. ROOM TEMPERATURE : 10-15MIN. HIGH SIDE TEMPERATURE :+125℃±3℃ 30MIN. ROOM TEMPERATURE : 10-15MIN. ABOVE TEST5 CYCLES AFTER LAST CYCLE, LEAVE FOR 1-3 HOURS. THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(0.5%R+0.05 Ω). |
| VIBRATION WITHSTAND | TEST METHOD MIL-STD-202 ITEM 204 | X, Y, Z-EACH DIRECTION 2 HOURS. AMPLITUDE 0.75MM. RANGE : 10HZ ~ 500HZ. THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(0.5%R+0.05 Ω). |
| LOAD LIFE | TEST METHOD MIL-STD-202 ITEM 108 | 70°±2℃. 1000 HOURS RATED VOLTAGE (1.5 HOURS ON, 0.5 HOUR OFF). THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(2%R+0.05 Ω). |
| RESISTANCE TEMPERATURE COEFFICIENT | TEST METHOD MIL-STD-202 ITEM 304 | THE RESISTANCE VALUE CHANGE RATE SHALL BE AS TABLE – 3. |
| LOAD LIFE IN HUMIDITY | TEST METHOD MIL-STD-202 ITEM 103 | THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(1.5%R+0.05 Ω). |
NOTE : RESISTORS SHALL BE EXAMINED FOR EVIDENCE OF NO MECHANICAL DAMAGE ,ARCING AND BREAKDOWN AFTER THE TEST.
High Precision Metal Film Fixed Resistor SPECIFICATIONS:
| DESCRIPTION | MF-100SS |
| TANDARD RESISTANCE VALUE RANGE | 0.1~1MΩ |
| POWER RATING AT 70℃ | 1W |
| MAX WORKING VOLTAGE | 250V |
| MAX OVERLOAD VOLTAGE | 500V |
| OPERATING TEMPERATURE RANGE | -55℃~+155℃ |
| TEMPERATURE COEFFICIENT | ±100PPM |
| TEMPERATURE CYCLING | ±( 0.5%R+0.05Ω) |
| INSULATION RESISTANCE | MIN.1,000 MΩ |
| HUMIDITY | ±( 1.5%R+0.05Ω) |
| SHORT-TIME OVERLOAD | ±( 0.5%R+0.05Ω) |
| SOLDERABILITY | MIN. 95% COVERED |
| VIBRATION | ±( 0.5%R+0.05Ω) |
| LOAD LIFE | ±( 2%R+0.05Ω) |
High Precision Metal Film Fixed Resistor CHARACTERISTICS:
| DC RESISTANCE VALUE | TEST METHOD MIL-STD-202 ITEM 303 | VOLTAGE AS TABLE -4. TEMPERATURE 25 ±2℃. AQL 0.25%. |
| VOLTAGE WITHSTAND | TEST METHOD MIL-STD-202 ITEM 301 | V-BLOCK METHOD. VOLTAGE AS TABLE -3 ×1.42 , 1 MIN. AQL 1%. |
| SHORT TIME OVERLOAD | TEST METHOD JIS C 5202 ITEM 5.5 | RATED VOLTAGE × 2.5 TIMES OR MAX.WORKINGVOLTAGE × 2 TIMES. ABOVE TEST 5 SEC. THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(0.5%R+0.05 Ω). |
| TERMINAL STRENGTH | TEST METHOD MIL-STD-202 ITEM 211 | TENSILE STRENGTH : 1K TENSIONAL STRENGTH : 180°, 2 CYCLES. BENDING STRENGTH : 0.5KG, 2 TIMES. THE RESISTANCE VALUE CHANGE RATE SHALL BEWITHIN ±(0.5%R+0.05 Ω). |
| SOLDERABILITY OF TERMINAL | TEST METHOD MIL-STD-202 ITEM 210 | 260±5℃ 10±1SEC. AFTER TESTING, LEAVE FOR 3 HOURS. THE RESISTANCE VALUE CHANGE RATE SHALL BEWITHIN ±(0.5%R+0.05 Ω). |
| TEMPERATURE CYCLE | TEST METHOD MIL-STD-202 ITEM 107 | LOW SIDE TEMPERATURE : -55℃±3℃ 30MIN. ROOM TEMPERATURE : 10-15MIN. HIGH SIDE TEMPERATURE :+125℃±3℃ 30MIN. ROOM TEMPERATURE : 10-15MIN. ABOVE TEST5 CYCLES AFTER LAST CYCLE, LEAVE FOR 1-3 HOURS. THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(0.5%R+0.05 Ω). |
| VIBRATION WITHSTAND | TEST METHOD MIL-STD-202 ITEM 204 | X, Y, Z-EACH DIRECTION 2 HOURS. AMPLITUDE 0.75MM. RANGE : 10HZ ~ 500HZ. THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(0.5%R+0.05 Ω). |
| LOAD LIFE | TEST METHOD MIL-STD-202 ITEM 108 | 70°±2℃. 1000 HOURS RATED VOLTAGE (1.5 HOURS ON, 0.5 HOUR OFF). THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(2%R+0.05 Ω). |
| RESISTANCE TEMPERATURE COEFFICIENT | TEST METHOD MIL-STD-202 ITEM 304 | THE RESISTANCE VALUE CHANGE RATE SHALL BE AS TABLE – 3. |
| LOAD LIFE IN HUMIDITY | TEST METHOD MIL-STD-202 ITEM 103 | THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(1.5%R+0.05 Ω). |
NOTE : RESISTORS SHALL BE EXAMINED FOR EVIDENCE OF NO MECHANICAL DAMAGE ,ARCING AND BREAKDOWN AFTER THE TEST.
