 |
| Quantity: | |
|---|---|
| Item Type | Power Rating at 70°C | Operating Temp. Range | Resistance Range (m2) | TCR (PPM/°C) | ||
| ±0.5% | ±1% | ±5% | ||||
| LRP06(1206) | 1W | -55~+170°C | 8,10,12,15,20,25,30,33,40 | ±50 | ||
| 3,4,5,7,8,10,12,15,20,25,30,33,40 | ±75 ±100 | |||||
| LRP20 (2010) | 1W | -55～+170℃ | 10、15、20、30、50、68、75、100 | ±75 | ||
| 2W | 10、15、20、30、50、68、75 | |||||
| LRP25(2512) | 2W,3W | -55~+170°C | 3,4,5,6,7,18,20,22,25,30,33,35,39,40,47,50, 60,68,70,75,80,82,90,91,100,120,150, 180, 200 | ±25 | ||
| 3,4,5,6,7,8,9,10,12,15,18,20,22,25,30,33, 35,39,40,47,50,60,68,70,75,80,82,90,91,100, 120,150,180,200 | ±50 ±75 | |||||
| Type | Size (Inch) | L (mm) | W (mm) | T (mm) | D (mm) |
| LRP06 | 1206 | 3.15±0.10 | 1.45±0.10 | 0.55±0.10 | 0.55±0.15 |
| LRP20 | 2010 | 5.00±0.15 | 2.40±0.15 | 0.55±0.15 | 0.80±0.20 |
| LRP25 | 2512 | 6.40±0.25 | 3.20±0.25 | 0.70±0.20 | 0.90±0.30 |
| Item | Requirement | Test Method |
| Temperature Coefficient of Resistance (T.C.R.) | As Spec. | IEC60115-14.8 JIS-C-5201-14.8 +25°C~125°C,25°C is the reference temperature |
| Short Time Overload | ±1.0% | EC60115-14.13 JIS-C-5201-14.13 5*rated power for 5 seconds |
| Insulation Resistance | 310G | IEC60115-14.6 JIS-C-5201-14.13 100V DC for 1 minute |
| Endurance | ±1.0% | IEC60115-14.25 JIS-C-5201-14.25.1 70±2°C,rated power for 1000 hrs with 1.5 hrs“ON”and 0.5 hr“OFF” |
| Biased Humidity | ±1.0% | MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10%of operating power |
| Dry Heat | ±1.0% | IEC60115-14.23.2 JIS-C-5201-14.23.2 at +170°C for 1000hrs |
| Bending Strength | ±1.0% | JIS-C-5201-14.33 EC-60115-14.33 Bending width 2mm once for 60 seconds |
| Solderability | 95%min.coverage | JIS-C-5201-14.17 EC-60115-14.17 245+5°C for 3seconds |
| Resistance to Soldering Heat | ±0.5% | JIS-C-5201-14.18 IEC-60115-14.18 260±5°C for 10seconds |
| Rapid Change of Temperature | ±1.0% | JIS-C-5201-14.19 IEC-60115-14.19 -55°Cto+155°C,5cycles |
| LowTemperature Storage | ±1.0% | IEC60115-14.23.4 JIS-C-5201-14.23.4 at -55°C for 2hrs |
| Item Type | Power Rating at 70°C | Operating Temp. Range | Resistance Range (m2) | TCR (PPM/°C) | ||
| ±0.5% | ±1% | ±5% | ||||
| LRP06(1206) | 1W | -55~+170°C | 8,10,12,15,20,25,30,33,40 | ±50 | ||
| 3,4,5,7,8,10,12,15,20,25,30,33,40 | ±75 ±100 | |||||
| LRP20 (2010) | 1W | -55～+170℃ | 10、15、20、30、50、68、75、100 | ±75 | ||
| 2W | 10、15、20、30、50、68、75 | |||||
| LRP25(2512) | 2W,3W | -55~+170°C | 3,4,5,6,7,18,20,22,25,30,33,35,39,40,47,50, 60,68,70,75,80,82,90,91,100,120,150, 180, 200 | ±25 | ||
| 3,4,5,6,7,8,9,10,12,15,18,20,22,25,30,33, 35,39,40,47,50,60,68,70,75,80,82,90,91,100, 120,150,180,200 | ±50 ±75 | |||||
| Type | Size (Inch) | L (mm) | W (mm) | T (mm) | D (mm) |
| LRP06 | 1206 | 3.15±0.10 | 1.45±0.10 | 0.55±0.10 | 0.55±0.15 |
| LRP20 | 2010 | 5.00±0.15 | 2.40±0.15 | 0.55±0.15 | 0.80±0.20 |
| LRP25 | 2512 | 6.40±0.25 | 3.20±0.25 | 0.70±0.20 | 0.90±0.30 |
| Item | Requirement | Test Method |
| Temperature Coefficient of Resistance (T.C.R.) | As Spec. | IEC60115-14.8 JIS-C-5201-14.8 +25°C~125°C,25°C is the reference temperature |
| Short Time Overload | ±1.0% | EC60115-14.13 JIS-C-5201-14.13 5*rated power for 5 seconds |
| Insulation Resistance | 310G | IEC60115-14.6 JIS-C-5201-14.13 100V DC for 1 minute |
| Endurance | ±1.0% | IEC60115-14.25 JIS-C-5201-14.25.1 70±2°C,rated power for 1000 hrs with 1.5 hrs“ON”and 0.5 hr“OFF” |
| Biased Humidity | ±1.0% | MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10%of operating power |
| Dry Heat | ±1.0% | IEC60115-14.23.2 JIS-C-5201-14.23.2 at +170°C for 1000hrs |
| Bending Strength | ±1.0% | JIS-C-5201-14.33 EC-60115-14.33 Bending width 2mm once for 60 seconds |
| Solderability | 95%min.coverage | JIS-C-5201-14.17 EC-60115-14.17 245+5°C for 3seconds |
| Resistance to Soldering Heat | ±0.5% | JIS-C-5201-14.18 IEC-60115-14.18 260±5°C for 10seconds |
| Rapid Change of Temperature | ±1.0% | JIS-C-5201-14.19 IEC-60115-14.19 -55°Cto+155°C,5cycles |
| LowTemperature Storage | ±1.0% | IEC60115-14.23.4 JIS-C-5201-14.23.4 at -55°C for 2hrs |
