Home / Products / Film Chip Resistor / Load Flame Resistant Metal Film Dip Resistor

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Load Flame Resistant Metal Film Dip Resistor

Availability:
Quantity:
Load Flame Resistant Metal Film Dip Resistor
Load Flame Resistant Metal Film Dip Resistor
Load Flame Resistant Metal Film Dip Resistor
Load Flame Resistant Metal Film Dip Resistor
Load Flame Resistant Metal Film Dip Resistor

APPLICABLE SCOPE :  

1.1 This specification is for use in METAL FILM FIXED RESISTORS  

1.2 Characteristics and specifications are according to those of : JIS C 5202  

1.3 RoHS and REACH compliant product

TYPEL
dPW1W2L1
MF1253.5±0.51.7±0.50.40 (0.43)±0.055±0.326±138±115±1
52±164±127±1
MF256.0±1.02.3±0.50.40 (0.48)±0.055±0.326±138±114±1
52±164±126+1
MF509.0±1.03.0±0.50.48 (0.60)±0.055±0.326±138±113±1
52±164+126±1
MF10011.0±1.54.0±0.50.55(0.70)±0.055±0.352+164±125±1
62±1.574±1.530±1
MF20C15.0±1.55.0±0.50.70(0.75)±0.0510±0.352+164±123±1
73±1.585±1.534±1
MF30017.0±1.56.0±0.50.70(0.75)±0.0510±0.373±1.585±1.533±1
DESCRIPTIONMF-125MF-25MF-50MF-100MF-200MF-300
STANDARDRESISTANCEVALUERANGE10Ω-1MΩ102-1MQ10Q-1MQ10Q-1MQ102-1MQ102-1MQ
POWERRATINGAT70℃1/8W1/4W1/2W1W2W3W
*MAX      WORKINGVOLTAGE200V250V350V500V500V500V
*MAXOVERLOADVOLTAGE400V500V700V1,000V1,000V1,000V
OPERATINGTEMPERATURERANGE-55℃~+135℃-55℃~+135℃-55℃~+135℃-55℃~+155℃-55℃~+155℃-55℃~+155℃
TEMPERATURE COEFFICIENT±100PPM±100PPM±100PPM±100PPM±100PPM±100PPM
TEMPERATURE CYCLING±(0.5%R+0.05Q)±(0.5%R+0.052)±(0.5%R+0.05Q)±(0.5%R+0.052)±(0.5%R+0.05Ω)±(0.5%R+0.052)
INSULATION RESISTANCEMIN.1,000 MΩMIN.1,000 MQMIN.1,000 MΩMIN.1,000 MQMIN.1,000 MQMIN.1,000 MQ
HUMIDITY±(1.5%R+0.05Q)±(1.5%R+0.05Q)±(1.5%R+0.05Q)±(1.5%R+0.05Q)±(1.5%R+0.05Q)±(1.5%R+0.05Q)
SHORT-TIME OVERLOAD±(0.5%R+005O)±(0.5%R+0.05O±(0.5%R+0.05②)±(0.5%R+0.05Ω)±(0.5%R+0.05Q)±(0.5%R+0.05②)
SOLDERABILITYMIN.95%
COVERED
MIN.95%
COVERED
MIN.95%

COVERFD
MIN.95%

COVERFD
MIN.95%
COVERED
MIN.95%

COVERFD
VIBRATION±(0.5%R+0.05Q)±(0.5%R+0.05Q)±(0.5%R+0.05Q)±(0.5%R+0.05Q)±(0.5%R+0.05Q)±(0.5%R+0.05Q)
LOADLIFE±(2%R+0.05Ω)±(2%R+0.05Ω)±(2%R+0.05Q)±(2%R+0.05Q)±(2%R+0.05Ω)±(2%R+0.05Q)
DC RESISTANCE VALUETEST METHOD MIL-STD-202 ITEM 303VOLTAGEAS TABLE -4.
TEMPERATURE25 +2℃.     AQL 0.25%
VOLTAGE    WITHSTANDTEST METHOD MIL-STD-202 ITEM 301V-BLOCK    METHOD
VOLTAGE ASTABLE-3 x1.42,  1 MIN.
AQL 1%.
SHORT TIME OVERLOADTEST METHOD JIS C 5202 ITEM 5.5RATED VOLTAGE x 2.5 TIMES
OR MAX.WORKINGVOLTAGE ×2 TIMES.
          ABOVE TEST5 SEC
THE RESISTANCE VALUE CHANGE RATE
SHALL BE WITHIN ±(0.5%R+0.05 Ω)
INTERMITTENT     OVERLOADTEST METHOD JIS C 5202 ITEM 5.8RATED VOLTAGEx4 TIMES,(1 SEC ON,25 SECOFF).

ABOVE TEST 10,000 CYCLES

THE RESISTANCE VALUE CHANGE RATE

SHALL BE WITHIN ±(0.5%R+0.05 Ω).





TERMINAL    STRENGTH





TEST METHOD MIL-STD-202 ITEM 211
TENSILE STRENGTH:1KG
TENSIONAL STRENGTH:180°,2 CYCLES.

BENDING STRENGTH:0.5KG 2 TIMES.

THE RESISTANCE VALUE CHANGE RATE
SHALLBE WITHIN ±(0.5%R+0.05Ω).
SOLDERABILITY OF TERMINALTEST METHOD MIL-STD-202 ITEM 210           260±5℃  10±1SEC
AFTER TESTING,LEAVE FOR 3 HOURS.

THE RESISTANCE VALUE CHANGE RATE
SHALLBE WITHIN ±(0.5%R+0.05Ω).
TEMPERATURE    CYCLETEST METHOD MIL-STD-202 ITEM 107LOW SIDE TEMPERATURE:-55℃±3℃ 30MIN.
ROOM TEMPERATURE:10-15MIN.

HIGH SIDE TEMPERATURE:+125℃±3℃ 30MIN.
ROOM TEMPERATURE:10-15MIN

          ABOVETEST5    CYCLES

AFTER LAST CYCLE,LEAVE FOR 1-3 HOURS.

THE RESISTANCE VALUE CHANGE RATE
SHALL BE WITHIN ±(0.5%R+0.05 Ω)
VIBRATION WITHSTANDTEST METHOD MIL-STD-202 ITEM 204X,Y,Z-EACH DIRECTION 2 HOURS.
      AMPLITUDE 0.75MM
     RANGE:10HZ~500HZ.

THE RESISTANCE VALUE CHANGE RATE
SHALLBE WITHIN ±(0.5%R+0.05Ω).
LOAD   LIFETEST METHOD MIL-STD-202 ITEM 10870±2℃.   1000 HOURS
RATED VOLTAGE(1.5 HOURS ON,0.5 HOUR OFF)

THE RESISTANCE VALUE CHANGE RATE
SHALLBE WITHIN ±(2%R+0.05 Ω).
RESISTANCE TEMPERATURE

COEFFICIENT
TEST METHOD MIL-STD-202 ITEM 304THE RESISTANCE VALUE CHANGE RATE
SHALL BEASTABLE-3.
LOAD LIFE IN HUMIDITYTEST METHOD MIL-STD-202 ITEM 103THE RESISTANCE VALUE CHANGE RATE
SHALLBE WITHIN ±(1.5%R+0.05Ω).






Previous: 
Next: 
Hong Kong Resistors Manufactory
Resistor Is Our Name

Product Category

Quick Links

Contact Us

  WhatsApp: +86-18926815312
  Skype: dzx_hkr
  Tel: +86-852-2896 2782
  Fax:+86-852-2896-5291
  Email: resistor@hkresistors.com
  Address: Block A, 10/F, Cheong Yick Industrial Building, 12 On Yip Street, Chai Wan, Hong Kong
Feedback
​Copyright ©2022 Hong Kong Resistors Manufactory. All rights reserved. Sitemap