 |
| Quantity: | |
|---|---|
Our products are to comply with environmental requirements in accordance
with SONY code no. SS-00259 with restrictions of 10 harmful materials.
Features:
Small size and light weight with size range per international standard
Highly stable in auto-placement surface mounting application
Compatible with both wave soldering and reflow soldering
Dimensions:
| Size | L | W | T | C | D | ||||||||||||||||||||||||
| 0201 | 0.60 ±0.03 | 0.30 ±0.03 | 0.23 ±0.03 | 0.15 ±0.05 | 0.15 ±0.05 | ||||||||||||||||||||||||
| 0402 | 1.00 ±0.10 | 0.50 ±0.05 | 0.35 ±0.05 | 0.20 ±0.10 | 0.25 ±0.10 | ||||||||||||||||||||||||
| 0603 | 1.60 ±0.10 | 0.80 ±0.10 | 0.45 ±0.10 | 0.25 ±0.15 | 0.30 ±0.15 | ||||||||||||||||||||||||
| 0805 | 2.00 ±0.10 | 1.25 ±0.10 | 0.50 ±0.10 | 0.35 ±0.20 | 0.40 ±0.20 | ||||||||||||||||||||||||
| 1206 | 3.10 ±0.10 | 1.55 ±0.10 | 0.55 ±0.10 | 0.45 ±0.20 | 0.40 ±0.20 | ||||||||||||||||||||||||
| 1210 | 3.10 ±0.10 | 2.50 ±0.10 | 0.55 ±0.10 | 0.45 ±0.25 | 0.45 ±0.25 | ||||||||||||||||||||||||
| 2010 | 5.00 ±0.20 | 2.50 ±0.15 | 0.55 ±0.10 | 0.60 ±0.25 | 0.50 ±0.25 | ||||||||||||||||||||||||
| 2512 | 6.35 ±0.20 | 3.10 ±0.15 | 0.55 ±0.10 | 0.60 ±0.25 | 0.60 ±0.25 | ||||||||||||||||||||||||
Type | RCT01 | RCT02 | RCT03 | RCT05 | RCT06 | RCT10 | RCT20 | RCT25 | ||||||||||||||||||||||||||||
Size | 0201 | 0402 | 0603 | 0805 | 1206 | 1210 | 2010 | 2512 | ||||||||||||||||||||||||||||
Power Rating at 70℃ | 1/20W | 1/ 16W | 1/ 10W | 1/8W | 1/4W | 1/3W | 3/4W | 1W | ||||||||||||||||||||||||||||
Max RCWV | 25V | 50V | 75V | 150V | 200V | 200V | 200V | 200V | ||||||||||||||||||||||||||||
Max Overload Voltage | 50V | 100V | 150V | 300V | 400V | 500V | 500V | 500V | ||||||||||||||||||||||||||||
Jumper<50mΩ | 0.5A | 1A | 1A | 2A | 2A | 2A | 2A | 2A | ||||||||||||||||||||||||||||
Operating Temperature Range | -55~+155℃ | |||||||||||||||||||||||||||||||||||
Standard Resistance Range | 0Ω | 0~50mΩ | ||||||||||||||||||||||||||||||||||
| ±1% (E-96) | 1Ω~ 10MΩ | 1Ω~ 10MΩ | ||||||||||||||||||||||||||||||||||
| ±5% (E-24) | 1Ω~ 10MΩ | 1Ω~22MΩ | ||||||||||||||||||||||||||||||||||
| ITEM | SPECIFICATION | TEST METHOD | ||||||||||||||||||||||||||||||||||
Solderability | Over 95% oftermination must be covered with solder | JIS C 5201 4.17 / MIL-STD-202G METHOD 208H / IEC 60115-1 4.17 Reflow Soldering ：Bath temperature:(235±5)℃,Immersion time:(2±0.5)s WAVE Soldering ：Bath temperature:(270±10)℃,Immersiontime:(2±0.5)s | ||||||||||||||||||||||||||||||||||
J : △ R ≦ ±( 1% + 0.05Ω) | JIS C 5201 4.18 / MIL-STD-202G METHOD 210F / IEC 60115-1 4.18 | |||||||||||||||||||||||||||||||||||
| Resistance to | F: △R≦±(0.5% + 0.05Ω) | The temperature of the solder bath shall be (260±5)℃,The immersion time | ||||||||||||||||||||||||||||||||||
| Solder Heat | No mechanical damage | shall be(5±0.5)s or(10±1)s as prescribed by the detail specification | ||||||||||||||||||||||||||||||||||
Temperature Coefficient of Resistance (TCR) | (0402 & 0201)： 1Ω~ 10Ω;>3.3M：±400ppm/℃ 10Ω(excluding 10Ω)~3.3M: ±200ppm/℃ (0603 or above)： 1Ω~ 10Ω;>1M：±200ppm/℃ 10Ω(excluding10Ω)~ 1M： ±100ppm/℃ | JIS C 5201 4.8 / MIL-STD-202G METHOD 304 / IEC 60115-1 4.8 The temperature characteristic or temperature coefficient of resistance is not specified for resistance values of less than 5R owing to difficulty of accurate measurement | ||||||||||||||||||||||||||||||||||
Short Time Overload | J : △ R ≦ ±(2% + 0.05Ω) F: △ R ≦ ±( 1% + 0.05Ω) | JIS C 5201 4.13/IEC 60115-1 4.13 2.5×Rated voltage or Max. Overload Voltage for 5 sec. measure resistance after 30 minutes | ||||||||||||||||||||||||||||||||||
| 恒温恒湿寿命 试验 Load Life Humidity | J : △ R ≦ ±(3% + 0.05Ω) F: △ R ≦ ±( 1% + 0.05Ω) | JIS C 5201 4.24/MIL-STD-202G Method 106G / IEC 60115-1 4.24 Maintain the temperature of the resistor at 40±2℃ and 90～95% RH with the rated voltage applied.Cycle ON for 1.5 hours and OFF for 0.5 hour for1000+48/-0 hours. After 1～4 hour, measure the resistance value. | ||||||||||||||||||||||||||||||||||
Load Life | J : △ R ≦ ±(3% + 0.05Ω) F: △ R ≦ ±( 1% + 0.05Ω) | JIS C 5201 4.25/MIL-STD-202G Method 108A / IEC 60115-1 4.25 70 ±2℃ , Max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” . | ||||||||||||||||||||||||||||||||||
J : △ R ≦ ±( 1% + 0.05Ω) | JIS C 5201 4.19/MIL-STD-202G Method 107G /IEC 60115-1 4.19 | |||||||||||||||||||||||||||||||||||
| Temperature | F: △R≦±(0.5% + 0.05Ω) | Repeat 5 cycles as follows -65℃(30 min.)+25℃(2～3 min.) +125℃(30 | ||||||||||||||||||||||||||||||||||
| Cycle | No mechanical damage | min.)+25℃(2～3 min.) | ||||||||||||||||||||||||||||||||||
Insulation Resistance | Between termination and coating must be over 1000MΩ | JIS C 5201 4.6 / MIL-STD-202G Method 302 / IEC 60115-1 4.6 Test voltage: 100±15V | ||||||||||||||||||||||||||||||||||
Bending Strength | J : △ R ≦ ±( 1% + 0.05Ω) F: △R≦±(0.5% + 0.05Ω) No mechanical damage | JIS C 5201 4.33 / MIL-STD-202G Method 211A / IEC 60115-1 4.33 Resistance change after bended on the 90mm PCB. Bend: 3mm for 0201 、0402 、0603 、0805 、 1206 、 1210 2mm for 2010 、2512 | ||||||||||||||||||||||||||||||||||
Our products are to comply with environmental requirements in accordance
with SONY code no. SS-00259 with restrictions of 10 harmful materials.
Features:
Small size and light weight with size range per international standard
Highly stable in auto-placement surface mounting application
Compatible with both wave soldering and reflow soldering
Dimensions:
| Size | L | W | T | C | D | ||||||||||||||||||||||||
| 0201 | 0.60 ±0.03 | 0.30 ±0.03 | 0.23 ±0.03 | 0.15 ±0.05 | 0.15 ±0.05 | ||||||||||||||||||||||||
| 0402 | 1.00 ±0.10 | 0.50 ±0.05 | 0.35 ±0.05 | 0.20 ±0.10 | 0.25 ±0.10 | ||||||||||||||||||||||||
| 0603 | 1.60 ±0.10 | 0.80 ±0.10 | 0.45 ±0.10 | 0.25 ±0.15 | 0.30 ±0.15 | ||||||||||||||||||||||||
| 0805 | 2.00 ±0.10 | 1.25 ±0.10 | 0.50 ±0.10 | 0.35 ±0.20 | 0.40 ±0.20 | ||||||||||||||||||||||||
| 1206 | 3.10 ±0.10 | 1.55 ±0.10 | 0.55 ±0.10 | 0.45 ±0.20 | 0.40 ±0.20 | ||||||||||||||||||||||||
| 1210 | 3.10 ±0.10 | 2.50 ±0.10 | 0.55 ±0.10 | 0.45 ±0.25 | 0.45 ±0.25 | ||||||||||||||||||||||||
| 2010 | 5.00 ±0.20 | 2.50 ±0.15 | 0.55 ±0.10 | 0.60 ±0.25 | 0.50 ±0.25 | ||||||||||||||||||||||||
| 2512 | 6.35 ±0.20 | 3.10 ±0.15 | 0.55 ±0.10 | 0.60 ±0.25 | 0.60 ±0.25 | ||||||||||||||||||||||||
Type | RCT01 | RCT02 | RCT03 | RCT05 | RCT06 | RCT10 | RCT20 | RCT25 | ||||||||||||||||||||||||||||
Size | 0201 | 0402 | 0603 | 0805 | 1206 | 1210 | 2010 | 2512 | ||||||||||||||||||||||||||||
Power Rating at 70℃ | 1/20W | 1/ 16W | 1/ 10W | 1/8W | 1/4W | 1/3W | 3/4W | 1W | ||||||||||||||||||||||||||||
Max RCWV | 25V | 50V | 75V | 150V | 200V | 200V | 200V | 200V | ||||||||||||||||||||||||||||
Max Overload Voltage | 50V | 100V | 150V | 300V | 400V | 500V | 500V | 500V | ||||||||||||||||||||||||||||
Jumper<50mΩ | 0.5A | 1A | 1A | 2A | 2A | 2A | 2A | 2A | ||||||||||||||||||||||||||||
Operating Temperature Range | -55~+155℃ | |||||||||||||||||||||||||||||||||||
Standard Resistance Range | 0Ω | 0~50mΩ | ||||||||||||||||||||||||||||||||||
| ±1% (E-96) | 1Ω~ 10MΩ | 1Ω~ 10MΩ | ||||||||||||||||||||||||||||||||||
| ±5% (E-24) | 1Ω~ 10MΩ | 1Ω~22MΩ | ||||||||||||||||||||||||||||||||||
| ITEM | SPECIFICATION | TEST METHOD | ||||||||||||||||||||||||||||||||||
Solderability | Over 95% oftermination must be covered with solder | JIS C 5201 4.17 / MIL-STD-202G METHOD 208H / IEC 60115-1 4.17 Reflow Soldering ：Bath temperature:(235±5)℃,Immersion time:(2±0.5)s WAVE Soldering ：Bath temperature:(270±10)℃,Immersiontime:(2±0.5)s | ||||||||||||||||||||||||||||||||||
J : △ R ≦ ±( 1% + 0.05Ω) | JIS C 5201 4.18 / MIL-STD-202G METHOD 210F / IEC 60115-1 4.18 | |||||||||||||||||||||||||||||||||||
| Resistance to | F: △R≦±(0.5% + 0.05Ω) | The temperature of the solder bath shall be (260±5)℃,The immersion time | ||||||||||||||||||||||||||||||||||
| Solder Heat | No mechanical damage | shall be(5±0.5)s or(10±1)s as prescribed by the detail specification | ||||||||||||||||||||||||||||||||||
Temperature Coefficient of Resistance (TCR) | (0402 & 0201)： 1Ω~ 10Ω;>3.3M：±400ppm/℃ 10Ω(excluding 10Ω)~3.3M: ±200ppm/℃ (0603 or above)： 1Ω~ 10Ω;>1M：±200ppm/℃ 10Ω(excluding10Ω)~ 1M： ±100ppm/℃ | JIS C 5201 4.8 / MIL-STD-202G METHOD 304 / IEC 60115-1 4.8 The temperature characteristic or temperature coefficient of resistance is not specified for resistance values of less than 5R owing to difficulty of accurate measurement | ||||||||||||||||||||||||||||||||||
Short Time Overload | J : △ R ≦ ±(2% + 0.05Ω) F: △ R ≦ ±( 1% + 0.05Ω) | JIS C 5201 4.13/IEC 60115-1 4.13 2.5×Rated voltage or Max. Overload Voltage for 5 sec. measure resistance after 30 minutes | ||||||||||||||||||||||||||||||||||
| 恒温恒湿寿命 试验 Load Life Humidity | J : △ R ≦ ±(3% + 0.05Ω) F: △ R ≦ ±( 1% + 0.05Ω) | JIS C 5201 4.24/MIL-STD-202G Method 106G / IEC 60115-1 4.24 Maintain the temperature of the resistor at 40±2℃ and 90～95% RH with the rated voltage applied.Cycle ON for 1.5 hours and OFF for 0.5 hour for1000+48/-0 hours. After 1～4 hour, measure the resistance value. | ||||||||||||||||||||||||||||||||||
Load Life | J : △ R ≦ ±(3% + 0.05Ω) F: △ R ≦ ±( 1% + 0.05Ω) | JIS C 5201 4.25/MIL-STD-202G Method 108A / IEC 60115-1 4.25 70 ±2℃ , Max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” . | ||||||||||||||||||||||||||||||||||
J : △ R ≦ ±( 1% + 0.05Ω) | JIS C 5201 4.19/MIL-STD-202G Method 107G /IEC 60115-1 4.19 | |||||||||||||||||||||||||||||||||||
| Temperature | F: △R≦±(0.5% + 0.05Ω) | Repeat 5 cycles as follows -65℃(30 min.)+25℃(2～3 min.) +125℃(30 | ||||||||||||||||||||||||||||||||||
| Cycle | No mechanical damage | min.)+25℃(2～3 min.) | ||||||||||||||||||||||||||||||||||
Insulation Resistance | Between termination and coating must be over 1000MΩ | JIS C 5201 4.6 / MIL-STD-202G Method 302 / IEC 60115-1 4.6 Test voltage: 100±15V | ||||||||||||||||||||||||||||||||||
Bending Strength | J : △ R ≦ ±( 1% + 0.05Ω) F: △R≦±(0.5% + 0.05Ω) No mechanical damage | JIS C 5201 4.33 / MIL-STD-202G Method 211A / IEC 60115-1 4.33 Resistance change after bended on the 90mm PCB. Bend: 3mm for 0201 、0402 、0603 、0805 、 1206 、 1210 2mm for 2010 、2512 | ||||||||||||||||||||||||||||||||||
