 |
| Quantity: | |
|---|---|
APPLICABLE SCOPE :
1.1 This specification is for use in CEMENT TYPE RESISTOR
1.2 Characteristics and Specifications are according to those of : JIS C 5201
| DESCRIPTION 内容 | SQP200 | SQP300 | SQP500 | SQP700 | SQP1000 | SQP1500 | SQP2000 | SQP2500 |
| POWERRATINGAT70℃ 额定功率(70℃) | 2W | 3W | 5W | 7W | 10W | 15W | 20W | 25W |
| OPERATINGTEMPRANGE 使用温度范圉 | -40℃~+155℃ | 40℃~+155℃ | 40℃~+155℃ | -40℃~+155℃ | 40℃~+155℃ | -40℃~+155℃ | 40℃~+155℃ | -40℃~+155℃ |
| TEMPERATURE COEFFICIENT 温度特性 | +350PPM | +350PPM | ±350PPM | ±350PPM | ±350PPM | ±350PPM | +350PPM | ±350PPM |
| INSULATIONRESISTANCE 絕緣電阻 | MIN.20MΩ | MIN.20MΩ | MIN.20MQ | MIN.20M Ω | MIN.20MΩ | MIN.20MΩ | MIN.20MΩ | MIN.20MΩ |
| HUMIDITY 耐濕負荷夀命 | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) |
| SHORT-TIMEOVERLOAD 短時間過负荷 | ±(2.5%R+0.05Ω | )±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω |
| SOLDERABILITY 焊錫性 | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED |
| LOADLIFE 负載夀命 | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) |
| FLAMERETARDANT 不燃性 | NOFLAMING | NOFLAMING | NOFLAMING | NOFLAMING | NOFLAMING | NOFLAMING | NOFLAMING | NOFLAMING |
| DC RESISTANCE VALUE | TEST METHOD MIL-STD-202 ITEM 303 | TEMPERATURE 25℃±2℃. AQL0.25%. | ||
| SHORT TIME OVERLOAD | TEST METHOD JIS C 5201ITEM 5.5 | RATED VOLTAGE X 2.5TIMES OR MAX.WORKINGVOLTAGE X 2 TIMES. ABOVE TEST5 SEC. THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(2.5%R+0.05 Ω) | ||
| SOLDERABILITY OF TERMINAL | TEST METHOD MIL-STD-202ITEM210 | AFTER | 260℃±5℃ TESTING,LEAVE | 10±1SEC. FOR3 HOURS. |
| THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(1%R+0.05Ω) | ||||
| VIBRATION WITHSTAND | TEST METHOD MIL-STD-202ITEM204 | X,Y,Z-EACH DIRECTION 2 HOURS. AMPLITUDE 0.75MM. RANGE:10HZ～500HZ. THE RESISTANCE VALUE CHANGERATE SHALL BE WITHIN ±(1%R+0.05Ω) | ||
| LOAD LIFE | TEST METHOD MIL-STD-202ITEM 108 | 70℃±2℃. 1000 HOURS RATED VOLTAGE(1.5 HOURS ON,0.5 HOUR OFF) THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(5%R+0.1Ω) | ||
| RESISTANCE TEMPERATURE COEFFICIENT | TEST METHOD MIL-STD-202ITEM 304 | THE RESISTANCE VALUE CHANGERATE SHALLBEAS TABLE-3. | ||
| LOAD LIFE IN HUMIDITY | TEST METHOD MIL-STD-202ITEM103 | THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(5%R+0.05Ω) | ||
APPLICABLE SCOPE :
1.1 This specification is for use in CEMENT TYPE RESISTOR
1.2 Characteristics and Specifications are according to those of : JIS C 5201
| DESCRIPTION 内容 | SQP200 | SQP300 | SQP500 | SQP700 | SQP1000 | SQP1500 | SQP2000 | SQP2500 |
| POWERRATINGAT70℃ 额定功率(70℃) | 2W | 3W | 5W | 7W | 10W | 15W | 20W | 25W |
| OPERATINGTEMPRANGE 使用温度范圉 | -40℃~+155℃ | 40℃~+155℃ | 40℃~+155℃ | -40℃~+155℃ | 40℃~+155℃ | -40℃~+155℃ | 40℃~+155℃ | -40℃~+155℃ |
| TEMPERATURE COEFFICIENT 温度特性 | +350PPM | +350PPM | ±350PPM | ±350PPM | ±350PPM | ±350PPM | +350PPM | ±350PPM |
| INSULATIONRESISTANCE 絕緣電阻 | MIN.20MΩ | MIN.20MΩ | MIN.20MQ | MIN.20M Ω | MIN.20MΩ | MIN.20MΩ | MIN.20MΩ | MIN.20MΩ |
| HUMIDITY 耐濕負荷夀命 | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) | ±(5%R+0.05Ω) |
| SHORT-TIMEOVERLOAD 短時間過负荷 | ±(2.5%R+0.05Ω | )±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω) | ±(2.5%R+0.05Ω |
| SOLDERABILITY 焊錫性 | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED | MIN.75% COVERED |
| LOADLIFE 负載夀命 | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) | ±(5%R+0.1Ω) |
| FLAMERETARDANT 不燃性 | NOFLAMING | NOFLAMING | NOFLAMING | NOFLAMING | NOFLAMING | NOFLAMING | NOFLAMING | NOFLAMING |
| DC RESISTANCE VALUE | TEST METHOD MIL-STD-202 ITEM 303 | TEMPERATURE 25℃±2℃. AQL0.25%. | ||
| SHORT TIME OVERLOAD | TEST METHOD JIS C 5201ITEM 5.5 | RATED VOLTAGE X 2.5TIMES OR MAX.WORKINGVOLTAGE X 2 TIMES. ABOVE TEST5 SEC. THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(2.5%R+0.05 Ω) | ||
| SOLDERABILITY OF TERMINAL | TEST METHOD MIL-STD-202ITEM210 | AFTER | 260℃±5℃ TESTING,LEAVE | 10±1SEC. FOR3 HOURS. |
| THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(1%R+0.05Ω) | ||||
| VIBRATION WITHSTAND | TEST METHOD MIL-STD-202ITEM204 | X,Y,Z-EACH DIRECTION 2 HOURS. AMPLITUDE 0.75MM. RANGE:10HZ～500HZ. THE RESISTANCE VALUE CHANGERATE SHALL BE WITHIN ±(1%R+0.05Ω) | ||
| LOAD LIFE | TEST METHOD MIL-STD-202ITEM 108 | 70℃±2℃. 1000 HOURS RATED VOLTAGE(1.5 HOURS ON,0.5 HOUR OFF) THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(5%R+0.1Ω) | ||
| RESISTANCE TEMPERATURE COEFFICIENT | TEST METHOD MIL-STD-202ITEM 304 | THE RESISTANCE VALUE CHANGERATE SHALLBEAS TABLE-3. | ||
| LOAD LIFE IN HUMIDITY | TEST METHOD MIL-STD-202ITEM103 | THE RESISTANCE VALUE CHANGE RATE SHALL BE WITHIN ±(5%R+0.05Ω) | ||
