 |
| Quantity: | |
|---|---|
Our products are to comply with environmental requirements in accordance with SONY code no. SS-00259 withrestrictions of 10 harmful materials.
| ltem Type | Power Rating at 70℃ | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | TCR (PPM/℃) | ||
| Resistance Tolerance | (±1%) | (±5%) | |||||
| FPF02(0402) | 1/10W | -55~+155℃ | 50V | 100V | 1~9.92 | ±400ppm | ±400ppm |
| FPF03(0603) | 1/8W | 50V | 100V | ||||
| FPF05 (0805) | 1/4W | 150V | 300V | ||||
| 10~1M2 | ±100ppm | ±200ppm | |||||
| FPF06(1206) | 1/3* 1/2W | 200V | 400V | ||||
| FPF10(1210) | 1/2*2/3*3/4W | 200V | 400V | ||||
| 1.01M~10MΩ | ±200ppm | ±200ppm | |||||
| FPF20(2010) | 3/4*1W | 200V | 400V | ||||
| FPF25 (2512) | 1.5 *2W | 250V | 500V | ||||
| Item | Requirement | Test Method | ||
| ±1% and Below | ±5% | Jumper | ||
| Temperature Coefficient of Resistance(T.C.R.) | As Spec | JIS C 5201-14.8 IEC 60115-14.8 -55℃~+125℃,25℃ is the reference temperature | ||
| Short Time Overload | ±(1.0%+0.05Ω) | ±(2.0%+0.05Ω) | <50mΩ | JIS C 5201-14.13 IEC 60115-14.13 2.5 times RCWV or Max. overload voltage for 5 seconds |
| Insulation Resistance | >10GQ | JIS C 5201-14.6 IEC 60115-14.6 Max. overload voltage for 1 minute | ||
| Endurance | ±(2.0%+0.1Ω) | ±(3.0%+0.12) | <100mΩ | JIS C 5201-14.25 IEC 60115-14.25.1 70±2°C, Max. working voltage for 1000 hrs with 1.5 hrs "ON"and 0.5 hrs"OFF" |
| Damp Heat with Load | ±(2.0%+0.1Ω) | ±(3.0%+0.1Ω) | <100mΩ | JIS C 5201-14.24 40±2°C, 90~95% R.H., Max. working voltage for 1000 hrs with 1.5 hrs"ON" and 0.5 hrs"OFF" |
| Dry Heat | ±(1.0%+0.1Ω) | ±(1.5%+0.1Ω) | <50mΩ | JIS C 5201-14.23.2 IEC 60115-12.23.2 at +155°℃ for 1000 hrs |
| Bending Strength | ±(1.0%+0.05Ω) | ±(1.0%+0.05Ω) | <50mΩ | JIS C 5201-14.33 JIEC 60115-14.33 Bending once for 5 seconds with 3mm 20102512 sizes: 2 mm |
| Solderability | 95%min. coverage | JIS C 5201-14.17 IEC 60115-14.17 245±5℃ for 3 seconds | ||
| Resistance to Soldering heat | ±(0.5%+0.052) | ±(1.0%+0.05Ω) | <50mΩ | JIS C 5201-14.18 IEC 60115-14.18 260±5℃ for 10 seconds |
| Voltage Proof | No breakdown or flashover | JIS C 5201-14.7 IEC 60115-14.7 1.42 times RCWV (RMS) for 1 minute | ||
| Leaching | Individual leaching area ≤5% Total leaching area ≤10% | JIS C 5201-14.18 IEC 60068-2-588.2.1 260±5°C for 30 seconds | ||
| Rapid Change of Temperature | ±(0.5%+0.05Ω) | ±(1.0%+0.05Ω) | <50mΩ | JIS C 5201-14.19 IEC 60115-14.19 55℃ to+155°C, 5 cycles |
| Storage Temperature:25±3℃;Humidity<80%RH | ||||
Why choose us?
1.Fast delivery time
With adequate monthly capacity of SMD resistors 15 Billion PCS and through hole resistors 20 Million PCS, we can secure fast delivery time to all the customers.
2. High quality
With more than 39 years in the industry, we well know the relevant standards and manufacture products based on requirements, also we have perfect quality system and tools to monitor the product from raw materials to finished products to secure quality .
3. Professional and reliable team
With a professional and experienced team, we understand every requirement of our customers and always try out best to satisfy them.
4. Quick Response
If you have any enquires or problem, please feel free to contact with us, we will try to answer you within 24 hours.
F.A.Q
Question 1
Question: Does the sample fee can be returned?
Answer: We can provide free samples.
Question 2
Question: How long will it take to receive my order?
Answer: The lead-time depends on your order quantity and destination.
Welcome to contact us freely for more details about our products!
Our products are to comply with environmental requirements in accordance with SONY code no. SS-00259 withrestrictions of 10 harmful materials.
| ltem Type | Power Rating at 70℃ | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | TCR (PPM/℃) | ||
| Resistance Tolerance | (±1%) | (±5%) | |||||
| FPF02(0402) | 1/10W | -55~+155℃ | 50V | 100V | 1~9.92 | ±400ppm | ±400ppm |
| FPF03(0603) | 1/8W | 50V | 100V | ||||
| FPF05 (0805) | 1/4W | 150V | 300V | ||||
| 10~1M2 | ±100ppm | ±200ppm | |||||
| FPF06(1206) | 1/3* 1/2W | 200V | 400V | ||||
| FPF10(1210) | 1/2*2/3*3/4W | 200V | 400V | ||||
| 1.01M~10MΩ | ±200ppm | ±200ppm | |||||
| FPF20(2010) | 3/4*1W | 200V | 400V | ||||
| FPF25 (2512) | 1.5 *2W | 250V | 500V | ||||
| Item | Requirement | Test Method | ||
| ±1% and Below | ±5% | Jumper | ||
| Temperature Coefficient of Resistance(T.C.R.) | As Spec | JIS C 5201-14.8 IEC 60115-14.8 -55℃~+125℃,25℃ is the reference temperature | ||
| Short Time Overload | ±(1.0%+0.05Ω) | ±(2.0%+0.05Ω) | <50mΩ | JIS C 5201-14.13 IEC 60115-14.13 2.5 times RCWV or Max. overload voltage for 5 seconds |
| Insulation Resistance | >10GQ | JIS C 5201-14.6 IEC 60115-14.6 Max. overload voltage for 1 minute | ||
| Endurance | ±(2.0%+0.1Ω) | ±(3.0%+0.12) | <100mΩ | JIS C 5201-14.25 IEC 60115-14.25.1 70±2°C, Max. working voltage for 1000 hrs with 1.5 hrs "ON"and 0.5 hrs"OFF" |
| Damp Heat with Load | ±(2.0%+0.1Ω) | ±(3.0%+0.1Ω) | <100mΩ | JIS C 5201-14.24 40±2°C, 90~95% R.H., Max. working voltage for 1000 hrs with 1.5 hrs"ON" and 0.5 hrs"OFF" |
| Dry Heat | ±(1.0%+0.1Ω) | ±(1.5%+0.1Ω) | <50mΩ | JIS C 5201-14.23.2 IEC 60115-12.23.2 at +155°℃ for 1000 hrs |
| Bending Strength | ±(1.0%+0.05Ω) | ±(1.0%+0.05Ω) | <50mΩ | JIS C 5201-14.33 JIEC 60115-14.33 Bending once for 5 seconds with 3mm 20102512 sizes: 2 mm |
| Solderability | 95%min. coverage | JIS C 5201-14.17 IEC 60115-14.17 245±5℃ for 3 seconds | ||
| Resistance to Soldering heat | ±(0.5%+0.052) | ±(1.0%+0.05Ω) | <50mΩ | JIS C 5201-14.18 IEC 60115-14.18 260±5℃ for 10 seconds |
| Voltage Proof | No breakdown or flashover | JIS C 5201-14.7 IEC 60115-14.7 1.42 times RCWV (RMS) for 1 minute | ||
| Leaching | Individual leaching area ≤5% Total leaching area ≤10% | JIS C 5201-14.18 IEC 60068-2-588.2.1 260±5°C for 30 seconds | ||
| Rapid Change of Temperature | ±(0.5%+0.05Ω) | ±(1.0%+0.05Ω) | <50mΩ | JIS C 5201-14.19 IEC 60115-14.19 55℃ to+155°C, 5 cycles |
| Storage Temperature:25±3℃;Humidity<80%RH | ||||
Why choose us?
1.Fast delivery time
With adequate monthly capacity of SMD resistors 15 Billion PCS and through hole resistors 20 Million PCS, we can secure fast delivery time to all the customers.
2. High quality
With more than 39 years in the industry, we well know the relevant standards and manufacture products based on requirements, also we have perfect quality system and tools to monitor the product from raw materials to finished products to secure quality .
3. Professional and reliable team
With a professional and experienced team, we understand every requirement of our customers and always try out best to satisfy them.
4. Quick Response
If you have any enquires or problem, please feel free to contact with us, we will try to answer you within 24 hours.
F.A.Q
Question 1
Question: Does the sample fee can be returned?
Answer: We can provide free samples.
Question 2
Question: How long will it take to receive my order?
Answer: The lead-time depends on your order quantity and destination.
Welcome to contact us freely for more details about our products!
